Archive for January 26th, 2011

Making dishes.

Wednesday, January 26th, 2011

January is usually a slow time at the pot shop. I make a lot of pots for the holiday sales, much more than I can sell. It is always good for people to come to the sale and see so much ware. Most year I don’t even think about throwing until February. January is a time to go snowshoeing and prepare taxes. Right about the end of December I got a rather large dinnerware order (30 place settings). I have been working my way through the dishes, not in too great a hurry but plugging along. It is nice to be indoors with the Utah weather so cold and snowy the past while.
img_3527.JPG
I do get out some to “work” with the new tractor Mrs Santa brought me.
img_3405.JPG
I start with dinnerware by throwing a “pancake” of clay to stick a bat to my wheelhead.
img_3410.JPG img_3411.JPG img_3412.JPG
img_3416.JPG img_3417.JPG
When the pancake is thrown to the width of the bats and smooth I cut groves in it, first with a point of a wooden rib and then with a serrated rib. This creates a surface that the wooden bats will adhere to easily.
img_3415.JPG
These are bats that I have been using since I made them thirty years ago. I cut them out on a table saw (another blog sometime) and gave them three coats of urethane. They have held up very well.
img_3418.JPG img_3420.JPG img_3421.JPG
You’ve got to love throwing on a treadle wheel. It is just fun. Carpe Argillam! I’ll not say too much about these throwing photos because they really speak for themselves.
img_3423.JPG img_3426.JPGimg_3428.JPG
I will say that is is critical to compress the clay on the bottom and at the rim to avoid cracking.
img_3430.JPG img_3431.JPG
I’m checking the width and depth. I want the width 12.5″ so there is a ways to go. It is good to have the current width in mind as I go to the next stage of throwing the plate. The depth is where it should be at about a half inch.
img_3433.JPG img_3436.JPG img_3437.JPG
I am now forming the rim of the plate, compressing the rim and the bottom.
rogers2.jpg rogers1.jpg
Phil Rogers illustrates the technique of forming the rim thus. Hid picture explains it better and faster than I can.
img_3438.JPGimg_3441.JPG img_3443.JPG img_3444.JPG
Once again I am measuring both height and width. The rim height is 1.5″ and the width is 12.5″ as it should be. With that done I set a pointer so I can throw the rest of the plates to that mark.
img_3467.JPG img_3469.JPG
The next day after the plates are leather hard it remove the bat I left on the pan cake and trim the edge of it to a sloping shape so I can use it to trim the plates.
img_3470.JPG img_3471.JPG img_3499.JPGimg_3476.JPG img_3482.JPG img_3500.JPG
I am placing a leather hard plate on this trimming chuck made from the pan cake which is also now a soft leather hard and will grip the clay nicely to keep it in place. With the plate centered on the chuck I press down gently with a small round disk of wood to hold the plate in place as I trim the foot. I am measuring the foot so I can get them consistent.
img_3486.JPG
The last move is to mark the plate.
goochware.JPG
Over the next few days I made a smaller plate and a soup bowl as per the clients wishes. The dinner plate is made from 5 lbs of clay, the salad plate also known as lunch plate is made from 3 lbs as is the soup bowl on top.
img_3516.JPG
While I was making the dinnerware Shonpa Yeshi was in the studio with me. He is a student at Wasatch Academy, a nearby boarding school. He is Tibetan and is from Dharamsala, India where there is a resettlement community. He stayed with us for three weeks while the school was out for the holidays. He took most of the photos for this blog and made some fun little clay objects. I was amazed at his ability to sit quietly and watch me throw.